Skip to product information

Team Associated RC8 T3.2e Team 1/8 4WD Off-Road Electric Truggy Kit

$619.99 $929.99
Sorry, this item is out of stock
SKU: ASC80944
The Team Associated RC8 T3.2e Team 1/8 4WD Off-Road Electric Truggy Kit shares many updated features with its nitro counterpart, the RC8T3.2, both using principles learned from the development of the RC8B3.1 to take the RC8 vehicle platforms to the next level.

The Area 51 engineers increased the length of the suspension arms to utilize the narrow arm mounts from the RC8B3.2, giving this upgrade increased traction and stability. Bottom-loaded suspension arm inserts provide adjustable flex and increase durability, while keeping the arms free of debris and easy to clean. A redesigned rear shock tower has been developed to work with the adjusted suspension arm geometry. A 3-piece center bulkhead allows for easy access to the center differential and makes adjustments even faster. Updated shock caps allow the RC8T3.2e to be run with the included stiff bladders, optional standard bladders, or as emulsion with no bladders; all with the same cap. The side guards have also been improved by using countersunk screws that thread into the chassis from the top of the truck, which greatly improves alignment to the chassis. 

NOTE: Completed vehicle shown for illustrative purposes only and is not included.

  • Updated suspension arm design with inserts for flex adjustments
  • Longer rear suspension arm length with narrow rear arm mounts
  • Updated rear shock tower for optimized rear suspension geometry
  • Redesigned stiff shock bladder design improves jumping and handling performance
  • Updated shock cap works for bladder or emulsion style shock setups
  • Shorter and lower front bumper reduces drag and allows easier access to anti-roll bar screws
  • I.F.M.A.R. approved rear wing
  • Updated chassis with chamfered front edges to reduce drag
  • Side guards are now threaded into the chassis from the top side of the truck
  • Two-piece sliding motor mount for easy gear mesh adjustment and motor removal
  • 90% parts compatibility with the current generation of RC8B3.2 and RC8T3.2 vehicles
  • 46T ring and 10T pinion gears on front and rear V3 differentials for consistent performance
Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:8 Scale
Assembly Level: Kit*
Length: 560mm (22.05in)
Width: Varies
Wheelbase: 376.5mm (14.82in)
Weight: Varies
Internal Gear Ratio: 4.6:1
Drive: 4WD
This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Needed to Complete: 

  • 1:8 scale motor (ASC27407 Reedy Sonic 877)
  • 1:8 scale ESC (ASC27007, 27008 Reedy Blackbox 850R)
  • 2- or 3-channel radio transmitter (2.4GHz recommended)
  • Transmitter batteries
  • 4S LiPo Battery Pack (ASC27345)
  • Steering servo (ASC27107 Reedy RT2207A Servo)
  • 1:8 scale truck wheels
  • CA (cyanoacrylate) glue (ASC1597 FT Tire Adhesive)
  • Paint for polycarbonate body
  • Thread-locking compound (ASC1596 FT Locking Adhesive)
  • Tools: Needle-nose pliers, Hobby knife, Reamer or hole punch for making holes in body, Ride height gauge
  • Other helpful items: Silicone Shock Fluid, Silicone Diff Fluid, Body Scissors (ASC1737 FT body scissors), Reamer/Hole Punch, Hex Wrenches (ASC1518 FT Hex Driver Tool Set), Nut Drivers (ASC1519 5pc Hex/Nut Driver Tool Set), Wire Cutters, Calipers or a Precision Ruler, Turnbuckle Wrench (ASC1114 FT Dual Turnbuckle Wrench)